Mitts for Me!

I decided to make mitts for me from the Steeler Pattern. I like primary colors.

Leaf Top

This is the Leaf Top from Bernat. It is knit top down and I love that knitting technique. Most of the sweaters I do without patterns are knitted top down. It is such an easy way to check size and the exciting part of the knitting comes first instead of last. Of course, that may be the reason I have a few UFOs lying around. I'm minimizing. Anyway, I used organic natural color cotton, a really soft slubby yarn. You have to really pay attention to the yoke - not a TV knit, but once you are past that, it is an easy knit. It looks good over a shirt or by itself.

Jacobite Sweater

This is the Jacobite Sweater from MamaZooma Handknits on Ravelry. I wanted to try something different. The yoke design is knit first and then the stitches for the body and the neck are picked up along the yoke and knit. It worked out really well. It looks better on than lying flat. I lengthened the sleeves to 3/4 length mostly because I had the yarn. My only dilemma is to decide the buttons. The light blue ceramic look the best but that will limit what I wear under it to something light blue, so I am leaning towards the brass buttons. I haven't sewn them on for over a week and I think it is because of the buttons. Maybe I will flip a coin.

Steelers Mitts

Again - yea Steelers!!! I didn't want to make a hat for my daughter - she is not a hat person - but she loves mitts. This is just a basic mitt pattern. The pattern stitch is a slip stitch pattern - also basic.

Yarn - Brown Sheep Lamb's Pride Worsted

Needles -8 double point - I usually use 4 - use what you are comfortable with.

Gauge - 4.5 stitches per inch

Size - Adult Medium

Cast on 36 stitches and join being careful not to twist your stitches. A neat trick: when joining your cast on stitches, use the tail and the working yarn to knit the first few stitches. You won't be able to tell where you have joined the stitches. Make sure to place a marker at the join.

Knit 2, purl 2 for 2 inches - or as long as you want the cuff to be.

Begin the pattern on the next round. The pattern is a 4 row repeat.

Row 1 - Knit with contrasting color (CC)

Row 2 - Purl with CC

Row 3 - Change to main color (MC) and *knit1, slip 1* repeat from * to * to complete the round.

Row 4 - Continue with MC and *purl 1, wyib slip 1* repeat from *to * to complete the round.

Repeat these 4 rows for the pattern.

Complete 3 pattern repeats and begin the thumb gusset. Decide where you want the gusset - the mitt doesn't have a front or back.

Round 1 - Work pattern, place marker, knit 1, place marker, complete row in pattern.

Round 2 - Work pattern, sm, m1, k1, m1, sm, complete row in pattern.

Round 3 and all odd rounds - knit

Round 4 - Work pattern, sm, m1, k3, m1, sm, complete row in pattern.

Round 6 - Work pattern, sm, m1, k5, m1, sm, complete row in pattern.

Round 8 - Work pattern, sm, m1, k7, m1, sm, complete row in pattern.

Round 10 - Work pattern, sm, m1, k9, m1, sm, complete row in pattern.

Round 12 - Work pattern, sm, m1, k11, m1, sm, complete row in pattern.

Round 13 - Work pattern, sm, k13, sm, complete row in pattern.

You have 13 stitches between the markers for the thumb.

Next round - work pattern until marker, slip the next 13 stitches on a stitch holder or waste yarn, cast on one stitch and continue in pattern. When bridging the gap where the gusset is, pull your yarn tightly to close the gap. - another neat trick is to pull the first stitch tightly and then pull the second stitch tighter. It works - if it doesn't for you, when you are weaving in the yarn ends, close the hole.

Continue in pattern for the body of the mitt for 4 pattern repeats or the length you wish. Drop the CC and knit 4 rounds of garter stitch (knit 1 round, purl 1 round) and bind off.

Slip the 13 stitches for the thumb onto your needles - divided however you wish. Using the MC yarn pick up 1 or 2 stitches at the base of the thumb where the gap is. The number depends on how close you have managed the gap. Once all the stitches are on (14 or 15) knit 4 rounds of garter stitch and bind off.

Weave in all of the ends - closing any gaps around the thumb. Make another mitt just like this.

Yea Steelers!

Steeler Mania!

Yea, the Steelers are going to the Super Bowl! I am so not a football fan, but I won't irritate anyone with my reasons. I'm glad that the Steelers won and actually hope they win the Super Bowl, but I am sooooo not a fan especially of Big Ben. But that being said, my SIL and my daughter are really big fans. I wanted to make them something for the game and I knit so...



I liked the hat and mitts so much I actually posted the on Ravelry as patterns. My first. I have made my own patterns before - I have been knitting too long not to have, but I have never published any of them. I thought I would try it.

The hat is a basic hat pattern.
Yarn: Brown Sheep Lamb's Pride Worsted
Needle: 9 circular 16"; 9 double points
Size: Adult - 22"
Gauge: 4 stitches to an inch

Cast on 94 stitches, join in the round being careful not to twist, place marker at the join and knit 2, purl 2 for 6 inches - This is really up to you. The brim can be as wide as you wish. I was knitting for a big guy so a 3 " brim seemed good.

When the brim measures 6 inches, change to straight knitting - knit every round for 2 rounds.

Change color and knit 1 round. Change back to main color and knit 1 rounds. Decide where you want the XLV and change to contrasting color. Using a stranded fair isle technique:

Row 1 - Knit 3 MC, 2 CC, 3MC, 5 CC, 2 MC, 2 CC, 2 MC, 2CC, Complete round with MC.

Row 2 - Knit 2 MC, 4 CC, 1 MC, 5 CC,3 MC, 4 CC, Complete round with MC.

Row 3 - Knit 1 MC, 2 CC, 2MC, 2 CC, 4 MC, 2CC, 4 MC, 1CC, Complete round with MC.

Row 4 - Knit 2 CC, 4 MC, 2 CC, 3 MC, 2 CC, 3 MC, 4 CC, Complete round with MC.

Row 5 - Knit 2 CC, 4 MC, 2 CC, 3 MC, 2 CC, 2 MX, 2 CC, 2 MC, 2 CC, Complete round with MC

Carry the yarn all the way around the hat as you work the rounds. Every 4 or 5 stitches twist the main color and the contrasting color to carry the yarn. Always knit with the main color once the letter stitches are done for the row. The contrasting yarn will only show on the right side of the hat in the letters but on the inside of the hat there will be floats all the way around. Make your floats loose so the hat doesn't pull in.

Complete the letters/chart and knit 1 round in main color. Then knit 1 round in contrasting color.

Knit until the hat measures 8 inches from the cast on edge - or until you think it is big enough.

Next round - *knit 10, k2tog*; repeat from * to * to end of round. 88 stitches remain

Round 2 and all of the even numbered rounds - knit

Round 3 - *knit 9, k2tog*; repeat from * to * to end of round.

Round 5 -*knit 8, k2tog*; repeat from * to * to end of round.

Round 7 -*knit 7, k2tog*; repeat from * to * to end of round.

Round 9 -*knit 6, k2tog*; repeat from * to * to end of round.

Round 11 -*knit 5, k2tog*; repeat from * to * to end of round.

Round 13 -*knit 4, k2tog*; repeat from * to * to end of round.

Round 15 -*knit 3, k2tog*; repeat from * to * to end of round.

Round 17 -*knit 2, k2tog*; repeat from * to * to end of round.

Round 19 -*knit 1, k2tog*; repeat from * to * to end of round.

Round 21 -*k2tog*; repeat from * to * to end of round. 8 stitches remain.

To finish the hat, cut your yarn leaving a 10" tail, using a yarn needle thread the yarn through the remaining 8 stitches. Pass the yarn through the hole in the top of the hat and draw the hole closed tightly. Weave the ends in.

If I would have been making the hat for my daughter, I would have added a pom pom but not for my SIL. Pom poms just don't seem like a guy thing.

I'm sorry for those of you who were hoping for a chart - I tried, I really did but couldn't get it to post to the blog.

If anyone has any questions or finds a problem with the pattern, please let me know.

The pattern for the mitts will be posted later today.

Go Steelers!

It's Been Awhile!

It has been a long time since I have posted. I have some New Year resolutions - I'm even late on that - and for once they have nothing to do with weight, exercise or health. Those are major concerns of mine, but you know, talking does nothing. I am just doing. Not well, not even close, but better than ever.

That's all I have to say about that. KNITTING!!!!! Since I have retired, I have done nothing but knit - not true but I am really knitting up a storm. The Yarn Harlot posted about "startitis" - a condition that I am evidently really suffering from. I just finished a sweater - my second of the new year. To be honest, I started them both in December. And I started 2 more yesterday with a third ready to be started and I am planning a fourth. Oh, and I have 2 almost finished. I have been knitting and watching paranormal shows in my office on the computer and knitting while watching TV in the evening. I must have gained 4 plus hours of knitting in the day and I am loving it.

My resolutions are to actually post to this blog and to document my projects on Ravelry. I am on that site every day, searching for patterns and looking at everyone else's projects. I thought I would share since I am learning so much from others.

My first project completed was this vest from Knitting Green, the Eco Vest. I really liked this vest. It was featured on the cover of the book and pretty much the reason I bought the book. It was an easy pattern - knit from the bottom up. Not a bad way to work a pattern especially with cables, but I wish more designers would work from the top down. That seems to be my favorite way of knitting. I know it won't work with every design, I just seem to prefer it. I didn't put the button on it because I wasn't wild about the loop closure. I think I need a pin or stick to close it. I will have to look for that. Over all I am really pleased with this sweater!